Painting metal outdoors
Preparation and suitable paint systems for iron, steel, zinc and aluminium outdoors.
Metal railings, gates, fences or downpipes are exposed to rain and sun outdoors. For the paint to last and to prevent rust, the right preparation and a suitable paint system are essential. Which system is right depends on the metal.
1. Prepare the surface
- Previously painted metal: Remove loose paint, sand off visible rust and key the whole surface.
- Bare iron or steel: Thoroughly sand off flash rust and rust.
- Zinc and galvanised steel: Clean and degrease with Uni-Reiniger 1032, then rinse with clean water.
- Aluminium: Clean, degrease and sand lightly.
2. Choose the paint system
Iron and steel (solvent-based system, best rust protection)
- Primer: Haftgrund 850, rust-passivating
- Two coats: Impredur Ventilack 822 (silk gloss) or Impredur Hochglanzlack 840 (high gloss)
Zinc, galvanised steel and aluminium (water-based system)
- Primer: Lacryl Allgrund 246
- Two coats: Lacryl-PU Seidenmattlack 270 or Lacryl-PU Glanzlack 275
Very smooth or difficult surfaces such as powder coating or coil coating: prime with 2K-Epoxi Varioprimer 865, then use one of the paints above.
Important notes
- Do not use alkyd paints on zinc and galvanised surfaces outdoors; use the water-based system instead.
- On iron and steel, the Lacryl-PU paints are intended for interior use only. For iron and steel outdoors, use the solvent-based system.
- Do not paint in direct sun, in the rain or at temperatures below +5 °C.
Summary
Iron and steel: Haftgrund 850 plus two coats of Impredur. Zinc and aluminium: clean, Lacryl Allgrund 246 plus two coats of Lacryl-PU. You will find all the products under Wood – metal exterior.