Proven paint systems for the facade
Primer and coats step by step: for new render, old rendered facades, renovations and concrete parts.
A facade coating is only as good as its build-up. Here you will find the paint systems that have proven themselves in practice in terms of price and performance. Always check first that the surface is firm, clean and sound.
How to check your facade
- Wipe test: Wipe your hand over the facade. If paint or sand sticks, the surface needs consolidating.
- Wetting test: Spray water onto the surface. If it soaks in quickly, the surface is absorbent and needs priming. If it beads off, the primer can often be omitted.
- Algae and fungi: Clean affected areas first and treat them with Pufas Algen- und Schimmel-Stop.
The systems
New mineral render, e.g. on a freshly insulated facade
- No primer needed
- Levelling coat with Extrasil 1911
Older, weathered rendered facade (first coat)
- Primer: Secobase 916
- Two coats of Secolux 918 or, more economically, Silganic 963
Previously painted facade (renovation)
- If the old paint hardly absorbs (wetting test), the primer can be omitted. On weakly absorbent, matt emulsion paint, prime with Secoprime 917.
- Two coats of Secolux 918 or Silganic 963
Untreated concrete parts
- Primer: Lacryl Tiefgrund ELF 595
- Two to three coats of Evocryl 200
Previously painted concrete parts
- As for untreated concrete; the primer is only needed if the old paint is sandy or highly absorbent.
Notes
- Where there is a risk of algae (insulated facades, north-facing walls, nearby trees), choose the topcoats in Protect quality.
- Do not paint in direct sun, rain, strong wind or below +5 °C.
- More on the products: Which masonry paint for which use? and Painting exterior concrete parts